Screen Printing Squeegee Blade - Soft - 1cm.

In stock

Square edge yellow rubber for screen printing squeegee. 

One unit corresponds to 1 centimeter long.
Cut to size from 5 centimeters.

Soft hardness - 65 shores. Special squeegee rubber for printing textile serigraphy and other surfaces that require a lot of ink drop.

Soft hardness rubber to mount screen printing squeegee to print, above all, fabric surfaces - 65 shores -

The squeegee rubber directly influences the ink deposit that remains on the surface. A soft rubber will adapt better to the support and will allow more ink to flow, while a hard rubber will allow less ink to pass through. The colors of the rubbers are indicative of the hardness of the rubber. And the hardness of the rubbers is measured in degrees shore; lower numbers correspond to softer rubbers and higher numbers to harder rubbers.

Our yellow square squeegee blades are 65 shores and therefore more suitable for textile printing and highly absorbent surfaces that require a large ink deposit. The green squeegee blades are 75 shores and are more versatile. They are suitable for any job, but especially for screen printing of graphic work and smooth surfaces such as paper, cardboard, wood, metal or plastic.

Rubber thickness: 0.9 cm.

Height of the rubber: 5 cm.

Minimum sale of 5 cm.


Squeegee blades are ideal for mounting on aluminum squeegee handles.

Copyright © 2021-present Rittagraf S.L. All rights reserved.